Spot Afield safes default code is 1,2,3,4,5,6. Open the safe door, with door open lock the handle. This will let you have assess to your things if you have trouble while setting the codes. To change the code, press the * 6 times. You should hear a single beep and one flash from the LED, then enter the default code 1,2,3,4,5,6. Again you should hear one beep and see one flash. Enter the new code you would like to use ...lets say 6,5,4,3,2,1. You should hear one beep and see one flash. Enter the new code again 6,5,4,3,2,1. The code should now be set to 6,5,4,3,2,1. Try the new code and see if it unlocks the door. Also try the old code to make sure it no longer works.. If at any time during the process you hear 3 beeps and flashes something went wrong. You will need to start over. Good Luck!!
Be careful, in choosing your new security code, you'll want to be sure that you can operate the unit quickly without making an error. Key in the preset factory code [ 1 5 9 # ]. The right light will turn green. Turn the handle to ensure bolts are activated.
Unlike electronic locks, owners cannot change the combinations on their gun safe's dial locks themselves. However, it is possible for a reputable locksmith to do so.
If your local locksmith is unavailable, call your safe's manufacturer for help opening it up. Before calling them, locate your safe's model and serial numbers. Many safe companies can provide you with the combination to your safe or send you a replacement key or code.
Manufacturer Reset Codes: Some electronic safes come with a default reset code or a master code provided by the manufacturer. This can be used to reset the safe's code. Accessing the Reset Button: Many electronic safes have a reset button inside the door or on the back panel.
Try the factory default code 159 or use the override key; then refer to the user manual to reset your original code or to enter a new code. 7 The Red and Green LED lights simultaneously when the correct PIN is entered. The batteries are depleted. Immediately replace the batteries.
Going something inside the safe may not be worth it in some instances. Hotel safes typically have an override code that is usually set to 1234, 1111, 9999, 0000, 123456, 000000, 111111, or 999999 by default.
The factory-set combination is 0-0-0-0. Turn the shackle 90° so that the notch on the shackle is aligned with the notch on the lock body. Press and hold the shackle down. While holding the shackle, set the dials to your new combination.
Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.